Conveyor belt hygiene
UV-C in the return run against biofilm — EU-wide uncritical (product not irradiated)
UV-C irradiation of the empty conveyor belt in the return run. Extends CIP cleaning intervals, reduces biofilm build-up. Since the product itself is NOT irradiated, this application does NOT fall under the food irradiation regulation — usable EU-wide without special approval.
- Food production (meat, cheese, baked goods, RTE)
- Convenience food + catering
- Slicing lines, filleting lines
- Pilot projects for UV-C entry in the plant
- Lamp recommendation per belt width
- Achieved dose on the empty belt
- PDF report with layout
- IFS Food / EHEDG
- FDA 21 CFR 177 (material splinter protection)
LUVEX is not a regulator. Always verify with the authority responsible for your jurisdiction. Our authorities guide lists the relevant offices.
Ready to spec this in?
Open this app in Simulex and compute the dose, lamp count and cure/kill directly — real ray-tracing, free of charge.
Suppliers for this application
No lamp is featured in this application yet.
We feature only manufacturers whose lamp is verified for this exact application — so you can simulate and source with confidence. None has been activated here yet.
UV manufacturer? Feature your lamp in this application →
Matching products
Curated, vendor-neutral systems and lamps suited to this application.
- Nuvonic UVpro Surface UV-C surface & conveyor-belt disinfection by Nuvonic Nuvonic UVpro Surface for conveyor surface disinfection
- American Ultraviolet Handheld UVC Fixture (18", 5.7 W UV) Portable 254 nm germicidal wand by American Ultraviolet Co. Handheld UV-C surface fixture
- Sankyo Denki G6T5/HC Dual UV Linear Lamp 6 W T5 dual-output 254 + 352 nm by Sankyo Denki Co., Ltd. Dual UV linear lamp (air+surface)